It is understood that the JZW90 threaded pile driver was developed by Fangyuan Group in cooperation with well-known domestic research institutions and it was completed in 4 months. The utility model is characterized in that the drill pipe is threaded and the hole is threaded, which can reduce the pouring amount of the concrete during construction, greatly enhance the bearing capacity of the foundation, and the safety and stability of the construction are remarkably improved, and the electrical control equipment of the pile driver adopts frequency conversion control. The threaded pile hole is formed completely. The pile driver also pays attention to the humanized needs in the control room design, which makes the working environment of the operator more refreshing.
The SPR650 three-axis deep-drilling rig is an advanced ground-based processing equipment that can be used for dams and civil buildings to prevent leakage. The pile driver is completely developed and produced by Fangyuan Group. It has high technical content and has high cost performance compared with similar foreign products. It can completely replace the construction of similar products imported from abroad and fill the blank of domestic products in the same industry.
At present, JZW90 threaded pile driver, SPR650 three-axis deep agitating boring machine and YZP150-8 disk-turning brick press have all been successfully tested. After testing, all technical indicators fully meet the design requirements.
Maximum load: 2000kg
Used to transfer materials overhead, our Light Girder Suspension Crane is especially suitable for use in workshop that have low ceilings as well as factories and sites made of lightweight steel frames where the bridge Crane reaches its limit.
The modular design contains fewer standard parts that make crane assembly as easy as stacking blocks. With these modular parts, users can reassemble a new crane, according to the change in lifting requirements of the alterations made to the workshop.
Due to the ultra-light weight of the crane, there is little friction between the trolley wheel and the rail. Easily moved by hands, this Suspension Crane can move clumsy, heavyweight workpiece in a fast manner. Available also with the mechanical electrical Chain hoist, hoist drive, electrical control device, and matched system, the crane requires limited maintenance and has a long service life.
This series of crane can run on both straight and curved rails. By using many other modular parts, it can be reassembled to become the single-girder or double-girder crane. Each of the modular parts is bored to the standard connector for its size. So the crane can be adjusted according to the layout of the worksite, in order to suit the specific material handling requirement and satisfy customer specific needs.
Optional Parts
Ÿ Aluminum rail
Ÿ Railway turnout
Ÿ Elevating platform
Ÿ Power supply device
Ÿ Electrical travel drive system
Suspension Crane
Suspension Crane,Light Girder Suspension Crane,Light Crane,Suspension Overhead Crane
Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com