The Chinese-army vacuum rake dryer has been shipped a few days ago. Looking back at the entire production process, we have had many innovations in vacuum rake drying to meet the diverse customer requirements.
The specificity of the Chinese weapons identity is also very strict. During the equipment technology seminar stage, the company put forward many requirements that we had never encountered before, but challenged even the opportunities, after many consultations and practices by our engineers, we made improvements in the existing vacuum technology. To meet its requirements, of course, this technical upgrade will also have a certain impact on the entire vacuum rake dryer.
For this 5 sets of ZB vacuum rake dryers, our company has adopted frequency conversion speed regulation on the transmission motor, which increases the operability of the drying process, making the model more applicable. Auxiliary equipment also includes hot water tank, condenser, buffer tank, water ring vacuum pump, vacuum pneumatic butterfly valve, hot water pump and so on. In order to achieve a higher degree of automation, our company sets up temperature probes in the water tanks, which are linked with electric heating and can automatically control the water temperature. Equipment safety issues can not be underestimated, so we set the temperature measurement point in the host jacket, if the water tank temperature measurement point failure, it will automatically turn off the heater, and over-temperature alarm, in addition to supporting the host at the scene, vacuum pump, pneumatic butterfly valve and other explosion-proof Button. These are all presented on the previously manufactured vacuum rake dryer and will not be described in detail here.
The improvements this time have implications on the overall structure and detail accuracy. First of all, our company considered that some materials have sticky wall properties. Therefore, we abandoned the old-fashioned monolithic structure and used the form in which the main body side door can be opened. The equipment is easy to clean, and the design is more reasonable and humane; in terms of details In the past, the inner wall of a vacuum-operated drum was not machined, resulting in the presence of glitches on the inner wall of the device that affected the quality of the product, and some even an irregular round shape seriously affected the operation of the device. Therefore, during the production process, our company specially processed the inner wall of the cylinder to ensure that there is no burr on the inner wall of the cylinder and the gap between each side and the lobe is less than 3mm.
This time, our company's improvement to the vacuum rake dryer reflects the rigorous technical requirements of our company and the company's advanced design concepts that keep pace with the times. This product upgrade is not the first time but it will not be the last time. Our company will bring better design ideas and equipment to customers in future products.
The specificity of the Chinese weapons identity is also very strict. During the equipment technology seminar stage, the company put forward many requirements that we had never encountered before, but challenged even the opportunities, after many consultations and practices by our engineers, we made improvements in the existing vacuum technology. To meet its requirements, of course, this technical upgrade will also have a certain impact on the entire vacuum rake dryer.
For this 5 sets of ZB vacuum rake dryers, our company has adopted frequency conversion speed regulation on the transmission motor, which increases the operability of the drying process, making the model more applicable. Auxiliary equipment also includes hot water tank, condenser, buffer tank, water ring vacuum pump, vacuum pneumatic butterfly valve, hot water pump and so on. In order to achieve a higher degree of automation, our company sets up temperature probes in the water tanks, which are linked with electric heating and can automatically control the water temperature. Equipment safety issues can not be underestimated, so we set the temperature measurement point in the host jacket, if the water tank temperature measurement point failure, it will automatically turn off the heater, and over-temperature alarm, in addition to supporting the host at the scene, vacuum pump, pneumatic butterfly valve and other explosion-proof Button. These are all presented on the previously manufactured vacuum rake dryer and will not be described in detail here.
The improvements this time have implications on the overall structure and detail accuracy. First of all, our company considered that some materials have sticky wall properties. Therefore, we abandoned the old-fashioned monolithic structure and used the form in which the main body side door can be opened. The equipment is easy to clean, and the design is more reasonable and humane; in terms of details In the past, the inner wall of a vacuum-operated drum was not machined, resulting in the presence of glitches on the inner wall of the device that affected the quality of the product, and some even an irregular round shape seriously affected the operation of the device. Therefore, during the production process, our company specially processed the inner wall of the cylinder to ensure that there is no burr on the inner wall of the cylinder and the gap between each side and the lobe is less than 3mm.
This time, our company's improvement to the vacuum rake dryer reflects the rigorous technical requirements of our company and the company's advanced design concepts that keep pace with the times. This product upgrade is not the first time but it will not be the last time. Our company will bring better design ideas and equipment to customers in future products.
Round steel refers to a solid long strip of steel with a circular cross-section. Round steel is divided into three types: hot rolled, forged and cold drawn. The size of hot rolled round bar is 5.5-250 mm. Among them: small round bars of 5.5-25 mm are mostly supplied in bundles of straight strips, which are often used as steel bars, bolts and various mechanical parts; round bars larger than 25 mm are mainly used for the manufacture of mechanical parts and billets of seamless steel pipes Wait.
Round Steel Bar,Stainless Steel Round Bar,Round Bars,Mild Steel Round Bar
Shandong Rizhaoxin Metal Products Co., Ltd. , https://www.rizhaoxinsteel.com