The plant is currently a large-scale natural gas processing plant and a large-scale light hydrocarbon deep processing enterprise mainly engaged in the recovery of ethane, etc., and currently owns the largest and China's first 50,000 tons of aerosol-grade hydrocarbon propellant butane which is built in China. Separation device. The high-purity isobutane product is a freon replacement product with a purity of more than 99.7% developed by the plant in 2001 and won the first prize of “Henan Provincial Petrochemical System Scientific and Technological Progress†and was recognized as “A†by Henan Provincial Science and Technology Commission. "High-tech products," a large supply of Shanghai Ek Shing Refrigeration Co.
Faced with the severe impact of chemical price fluctuations in oil products and fierce competition in domestic and foreign markets in recent years, the plant combines the characteristics of the light hydrocarbon deep processing industry and summarizes the experience of product export and export over the past few years. It combines market strategies, product strategies, and sales strategies. , Consolidation of service strategies, the introduction of advanced quality management and marketing models at home and abroad, and stepping up with international standards. At the same time, establish and improve its own sales information network, collect information in a timely manner, divide product distribution areas according to market dynamics, actively develop sales channels, increase market penetration, actively adapt to different market requirements, and develop risk sharing and benefit sharing. Marketing pattern.
In the actual work, each process of the plant is strictly in accordance with the ISO9002 000 standard and the quality monitoring standard. It is forbidden to leave the unqualified product and the qualified rate of the product reaches 100%. In addition, we have successfully tackled the problems of raw material gas, No. 6 extraction solvent oil desulfurization, and isobutane and isopentane dehydration. Our major product quality control indicators have reached the international level. Related quality standards are trusted by users.
Plastic car exterior parts refer to front and rear bumper moulds, fog lamp moulds, and grilles and all plastic accessories, are requesting high quality with hardened steel 1.2738 or Finkl P20 hard steel in order to guarantee specified mould life such as 1000000shots. Plastic injection material is PP or ABS as per customer's requirement. Ceeto company has skilled design engineering team who is able to design plastic car bumper moulds as per part geometry, bumper mould design will be first considered hidden parting line or visible parting line according to DFM analysis and moldflow report.
Technical information for Car front bumper and rear bumper mould
- Design software: Pro-E
- Mould cavity: single cavity
-
Molding material: PP, ABS, PE
- Mould cavity and core steel: 1.2738, P20, P20HH, 718H
- Hot runner system: Synventive, Yudo, HRS, Moldmaster
- Ejection system: Ejector pins, angle lifters
- Leadtime: 120 days
-
Mould life: 500000 shots to 1000000 shots
- Mould packing: wooden box
Ceeto Service Scope to manufacture car bumper mould
-
Plastic bumper product DFM analysis
-
Moldflow analysis
-
Plastic car bumper mould design
-
Plastic car bumper mould assembly drawing
-
Plastic car bumper mould machining
-
Plastic car bumper mould testing via injection molding machine
-
Plastic car bumper mould packing
-
Plastic car bumper samples packing
-
Mould spare parts preparation
-
We also support you for prototype mould design and manufacture
Plastic Car Front Bumper and rear bumper mould test
Before we ship bumper mould to you, we will have bumper mould buy-off in house together with you, and we must make official at least three mould tryouts and 2000 empty cycle for mould to check if mould function is ok in a certain time.
Normally, you and we attend the validation procedure together and sign off after checking. What we are checking usually are as follows:
- Compatibility with Injection Machine to be used
- Is size of the mould ( Leight* width* Height ) correct?
- Is weight of the mould is correct?
- Are lifting eyebolts fully seated on the mold and not interfering with mold action?
- Are all transportation bars installed and in correct color as you request?
- Are knock-out holes for mechanical ejection and the layout correct as designed?
- Is electric box wired correctly as per injection machine standard?
- Are dimensions of locating ring correct?
- Is radius and orifice diameter of sprue bush correct?
-
Are clamping features correct?
- Is the mold construction compatible with robot gripping if applicable to take off part?
Plastic car bumper mould material and heat treatment
What we will also inspect mould material and heart treatment as follows:
- Is any welding used on mold? Is welding process correct for the steel used?
- Have all mold plates been stamped with markings?
- Provide the heat treatment certificate and hardness for all applicable mold components
-
Are moving parts nitrided? Provide nitride certificate.
We warmly welcome you to visit us and send us RFQ, we want to be your part of suppliers and we will do our utmost efforts to make high quality of moulds and products, if you have any doubts about technical points, please don't hesitate to let us know, we are looking forward to hearing from you, thanks a lot.
Automotive Exterior Plastic Injection Mould
Automotive Exterior Plastic Injection Mould,Injection Molding Automotive Parts,Plastic Car Front Bumper,Plastic Car Rear Bumper
Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com