(1) Regulating range: It refers to the adjustable range of pressure reducing valve output pressure P2, in this range requires the required accuracy. Regulating the pressure range and the main spring stiffness. (2) Pressure characteristics: It refers to the flow rate g is set value, due to input pressure fluctuations caused by the output pressure fluctuations. The smaller the output pressure fluctuation, the better the characteristics of the pressure reducing valve. The output pressure must be lower than the input pressure - the setting will not substantially change with the input pressure. (3) flow characteristics: It refers to the input pressure - timing, the output pressure with the output flow g changes in the holding capacity. When the flow rate g changes, the output pressure changes as small as possible. The lower the general output pressure, the smaller it fluctuates as the output flow changes.
The Hydraulic Copper Metal Baler is used for cold press metal scraps within 6-8mm in thickness under most circumstance. The processable material includes scrap steel, waste containers and disintegrated vehicle shell etc. After cold pressing into block, it is convenient for storage and transportation or putting into furnace. Hydraulic Metal Baler working principle: The metal scraps and other materials are placed in the workbin. The hydraulic cylinder works to suppress the pressure. The baled material is compressed and formed into various metal blocks.
Copper Shavings Baler, Copper Turnings Baler, Waste Copper Baler, Copper Wire Baler, Copper Scraps Baler
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-balingmachine.com