Steel Coil Slitting Line/Slitter/Slitting Machine

Model NO.: HFSL
Recoil External Diameter: Max1800mm
Speed: 30-180m/Min
Slit Width: Min 25-30mm
Adapt Material: Cr Hr Gi Ss
Trademark: HuaFei
Transport Package: Plastic Film Cover or Plywood Case
Specification: according to work piece
Origin: Jinan
                      Steel coil slitting line machine for uncoiling slitting recoiling

********Thin plate slitting line (0.2-3mm)  
 
1.    This line is Used for steel plate coil to uncoiling, slitting, recoiling to required steel strips. This line apply to hot rolled carbon steel, tinplate, stainless steel and other different kinds of surface plated metal. 

2.  Slitting line is used for steel plate coil to uncoiling, slitting, recoiling to required steel strips. This line apply to hot rolled carbon steel, tinplate, stainless steel and other different kinds of surface plated metal.
   
3.   For the user with higher requirement, uncoiling with automatic edge aligning or centering is preferable, which has the advantage of easy entering coil, high working efficiency, improving cutting precision and protecting plate as well. EPC automatic edge control can be adopted as well, which can guarantee recoiling in tidiness, especially for the wider recoiling
   
4.    This line is composed of entry coil car, uncoiler, feeding in device, leveler, head shearing device, loop pit, side guide, slitting device, scrap winder, tension unit, recoiling machine, unloading device.etc.

5. Parameters
 
 Model No.
 Parameter		 Cutting thickness
 (mm)		 Cutting thickness
 (mm)		 Slitting quantity Width precise
 (mm)		 Coil weight
(T)
 		  
Slitting speed(mm/min)		 Remark
HFSL-2×400 0.2-2 100-400 20-5 ±0.05-0.1 5T 100 Technical data, configuration can according to customer requirement.
HFSL-2×800 0.2-2 100-800 30-5 ±0.05-0.1 8T 120
HFSL-2×1300 0.2-2 400-1300 30-5 ±0.05-0.1 8T 120
HFSL-2×1600 0.2-2 400-1600 40-5 ±0.05-0.15 10T 150
HFSL-3×1600 0.3-3 500-1600 40-5 ±0.1-0.2 15T 150
HFSL-3×1800 0.3-3 500-1800 40-5 ±0.1-0.2 15T 150
 

********Thick plate slitting line (4-12mm)

1.   Slitting line is used for steel plate coil to uncoiling, slitting, recoiling to required steel strips. This line apply to hot rolled carbon steel, tinplate, stainless steel and other different kinds of surface plated metal.

2.  Slitting line is used for middle and thick hot rolled steel plate coil to uncoiling,slitting, recoiling to required steel strips. This line apply to hot rolled carbon steel, thick aluminum coil, stainless steel and other different kinds of surface plated metal.
   
3.  Slitting line is composed of entry coil car, uncoiler, feeding in device, simple leveler, head shearing device, Side Guide, thick plate slitting device, scrap winder, tension unit, recoiling machine, unloading device.etc.
   
4.  This production line Hydraulic system main parts adopt Germany BOSCH-REXROT components and seals, electrical control adopt Japan Mitsubishi PLC program controller main motor of leveler and slitting device adopts high power DC motor, DC controller adopts ETD products, speed of uncoiler, slitting device and recoiling machine controlled by high-performance electric, able to achieve matched speed. This production line has high degree of automation, can process high strength thick plate, little amount of wrong side recoiling coil, has stable and reliable performance, easy operation and maintenance, etc

5.Parameters
 
 
Model No.
 
Parameter		 Cutting thickness
(mm)		 Coil width
(mm)		 Slitting quantity Width precise
(mm)		 Coil weight
(T)		 Slitting speed
(mm/min)		 Remark
HFSL-4×1600 1-4 500-1600 20-5 ±0.1-0.2 20T 40-60 Technical data, configuration can according to customer requirement.
HFSL-6×1600 1-6 500-1600 15-5 ±0.2-0.3 25T 30-50
HFSL-6×2000 1-6 500-2000 15-5 ±0.2-0.3 30T 30-50
HFSL-8×1600 2-8 500-1600 15-5 ±0.3-0.5 30T 20-30
HFSL-10×1600 2-10 500-1600 10-5 ±0.5-0.8 30T 15-20
HFSL-12×1600 3-12 500-1600 10-5 ±0.5-0.8 30T 15-20
 
********
Machine video link
https://www.facebook.com/AKZ250/videos/vb.100006914478186/1704692616437871/?type=3&theater
https://www.facebook.com/AKZ250/videos/vb.100006914478186/1704692063104593/?type=3&theater

*******
Service

Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the Spare Parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
 
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 80.00 USD per person, per day.



 

Ball Valve

Resilient Seated Gate Valve Co., Ltd. , http://www.cnbutterflyvalve.com