In order to avoid friction or collision with the surrounding vehicles during driving, we must maintain a safe distance. How should we control this distance? How can we easily know the distance to the surrounding vehicles in the driving position? Take a look at the specific introduction.
First, the situation on the general road in the urban area. In indoor roads, we need to make reasonable judgments on the distance between different roads. For example, when a traffic jam occurs, when we encounter an ascending ramp, we encounter construction in front of us. In different situations, we judge the distance from the vehicle. There are certain differences in methods. The general road, as long as we maintain an ordinary state of mind, not because of the slowness of the front of the car and irritability do not be depressed because of the situation in the car, in the driving process to take the initiative to avoid pedestrians. When you go uphill, you must control the distance between vehicles and do not chase the vehicle ahead. This can easily lead to dangerous situations. When encountering construction and other conditions ahead, it is better to control the distance from the vehicle and prepare for turning or diversion.
Second, the situation on the highway. It is very important to control the distance on the freeway, which has a great influence on the safety of driving. In the dangerous road section, we can confirm the vehicle distance through the vehicle distance confirmation line. When driving on other road sections, we must pay attention to the state of the vehicle in front and keep driving at a constant speed. Try to reduce the overtaking situation. Observe the surrounding vehicles. Do not speed up and prevent accidents.
Third, some methods for car distance estimation. For experienced drivers, there are many ways to estimate the distance between vehicles and introduce some simple methods for everyone. The distance between the rear vehicle and its own vehicle is determined by the area of ​​the rear vehicle that is seen in the rearview mirror. Generally, the larger the area behind the rearview mirror in the rearview mirror is, the closer it is to its own distance, and vice versa. The full-scale situation is about 1 meter apart and half of the area is 5-8 meters apart. Based on this, basic judgments can be made. Look at the distance between the front edge of your car and the front bumper to determine the distance to the front car. Just see the distance from the front bumper is 1M. You can see that the front tires are 3-5 meters apart. In order to make reasonable judgments.
System Scaffold,Steel Support Scaffolding,Steel Scaffolding Prop,Scaffolding Steel Prop
Hebei Qierjie New Energy Technology co., Ltd , https://www.qejfastener.com