Car glass sun film foaming fear of cancer, please tear it off immediately!

In order to reduce the pain caused by the long exposure of the sun during driving, it is basically the work that the car owner must do to give the glass an insulation film.

Solar films have different life spans depending on quality. Life expectancy has two kinds of performance: 1, a serious fading, blistering bulge.

Remind everyone: If the solar film is foaming, tear it off immediately! Replace the new film!

Because the blistering solar film will release a lot of formaldehyde! If you don't tear off the bubble, it will seriously damage your health and even cause cancer!

Car mats, films, car paint paint, etc. contain formaldehyde, and after the car through the exposure, the formaldehyde content of the car may rise. Formaldehyde is in the form of tacky glue. As the temperature rises and time increases, its volatilization will increase, which will lead to increased formaldehyde concentration in the car.

In-car formaldehyde mainly comes from adhesives and plastics. After the solar film is foamed, the enclosed environment between the solar film and the glass is destroyed, and toxic gases can be released inside the vehicle. Excessive levels of formaldehyde in the car will cause irritation to the human respiratory tract, skin and mucous membranes, harm human health, and even worse, lead to leukemia and cancer. Therefore, if the solar film is blistering, tear it off immediately! Replace the new film!


Nylon Pleated Filter Cartridge

Nylon Pleated Filter Cartridge is made of pleated nylon membrane, polypropylene non-woven fabrics and polypropylene cage. During the production, it is purity, free of surfactants, resins, binders and adhesives. It can be used for the liquid and solvent clarification and critical filtration.


● Features and Benefits

Naturally Hydrophilic Nylon Membrane for sterile filtration
Wide Chemical resistant to alkaline solutions and organic solvents
Especially suitable for filtering alkaline, but high adsorbance of protein
100% integrity test; Meet FDA standard 
● Micron Rating(µm):  0.10    0.20    0.45    0.65    1.00    3.00


● Typical Applications

1. Pharmaceuticals, APIs, Biologics; Solvent;
2. Ultrapure water and disk, display, multi silicon process water in Electronics;
3. Food & Beverages, Wine, Beer, Mineral Water;
4. Fine chemicals, especially ketone, ester, ether;


● Materials of Construction

Filter Media: Nylon
Support Layer: Polypropylene
Inner Core: Polypropylene/Stainless Steel
Outer Core: Polypropylene


●Cartridge Dimensions

Outer Diameter: 69mm
Inner Diameter: 33mm
Effective Filtration Area: ≥0.65m2


●Operation Conditions

Normal Operating Temperature: ≤60℃
Max. Operating Temperature: 80℃(△P≤0.10Mpa)
Max. Differential Pressure:  Normal Flow direction:4.2 bar at 25℃
Reverse Flow direction: 2.1 bar at 25℃
Steam Sterilization for 30 minutes at 121±2℃
PH Value compatibility: 6-13


●Cartridge Safety

Endotoxin: <0.25 EU/ml
Extractable: 0.03g/10"

Nylon Pleated Filter Cartridge

Industrial Water Filter,Nylon Pleated Filter Cartridge,Nylon Micron Membrane,Nylon Filter Cartridge

Ji'an city Qing Feng Filter Equipment Material CO.,Ltd , https://www.qingfengfilter2.com