[SUV China.com] Seeing that the year is approaching, the north is becoming more and more pure. Although everyone is waiting for the wind to come, the sudden drop in temperature after the strong winds is indeed too much to eat. In particular, friends who drive out in the morning, many people can not wait to enter the car to put the full amount of warm air, in fact, did not have much effect. Therefore, many people today do not properly use the warm air inside the car. Today we have come to talk about how to properly open the "warm mode" in the car!
Do not start warm air immediately when cold car starts
In winter, when the car is too cold, many owners turn the air conditioner on to warm air when the vehicle is started. In fact, because the winter engine has just started, the temperature of the water tank is still very low. Not only is it not possible to quickly increase the temperature in the car, but it also increases the engine load and affects the normal increase of engine temperature.
The correct approach is to drive away directly after the “hot car†and wait for the engine temperature pointer to go to the middle (some vehicles are slightly different), turn on the heater air conditioner, and set the air circulation as the outer circulation. Allow the cold air in the vehicle to exit the vehicle, wait for 2 to 3 minutes, and set the air circulation to the internal circulation.
If your car has a seat heating function, use it first. After the engine water temperature is raised, switch to air conditioning heating. If your car does not have seat heating, there is no way to do it.
Prolonged warm air need to pay attention to proper ventilation
The long-term use of warm air in the car, although it feels very comfortable, actually the air quality of the car will become very bad this time. Especially in the internal circulation mode, the air in the confined space will not circulate smoothly, and it will also cause carbon dioxide content. The increase in driving is easy to dodge.
The correct approach is that although the winter is very cold, but the owner must properly open the four windows to open a thin seam, remove some of the dirty air inside the car, which opened the air conditioning warm air after the feeling of chest boring symptoms, easy Drowsiness will be effectively relieved.
The temperature should not be too high, do not blow face directly
As we have already explained in the previous section, long hours of warm air in the vehicle can easily cause drowsiness and traffic accidents. Therefore, when driving, be sure to pay attention to the temperature inside the car. It should not be too high. Especially during the driving on the expressway, if the temperature of the warm air is too high, it will be easier to aggravate the drowsiness of the owner and an accident may occur.
In addition, because the heat energy of the warm air comes from the engine heat, the hot air is relatively dry, which will make the air in the car drier. This will make the skin dry more easily. Therefore, do not blow the warm air directly because the warm wind easily breeds bacteria. There are also various germs in the air-conditioning duct, so do not blow your face directly.
Don't smoke in the car while you are warming
Smoking during the opening of the air-conditioner in the car will cause a large amount of amines and nicotine in the smoke to adhere to the surface of the evaporator. When the rainy weather occurs for a long time or the air-conditioner is not used for a long time, mildew will be generated on the surface of the evaporator and the air in the car will be seriously polluted. Therefore, it is best not to smoke when you turn on the air conditioner.
Xiao Bian friendship, special tips!
1. With warm air, don't be foolish to open AC!
Many owners believe that warm air is also part of the air conditioner, so AC switches will be turned on before using warm air. In fact, the heat of the warm air comes from the engine heat, and the AC key activates the air-conditioning compressor, which is the switch that sends the cold air, so with warm air, so the air-conditioning needs to offset a part of the engine power, and the warm air is not Influence power.
2. Open the warm air, really do not spend money!
Many people think that it is very expensive to use warm air. In fact, it is not because of the open air heating and fuel consumption. Instead, you open the AC and the compressor has been working. It has increased the burden on the engine and it may feel costly. Because the warm air uses the heat of the engine, which is equivalent to "use of waste," so you don't have to pay for the warm air!
Other Surface Treatment Parts Processing
Stainless Steel Process,Other Surface Treatment Parts Processing,Structural Ceramic Parts Processing,Sand Blasting Parts Processing
Dongguan Kingswin Wing Tat Metal Products Co., Ltd. , https://www.milling-turning.com