On March 26, 2016, the "Net" Direct FAW Xichai Kangwei Fourth National Product Promotion Conference was held at the Beichen Hotel in Nantong. FAW Xichai invited Kumah Suhu Regional General Manager Cui Huanpu and Kama Motors Nantong Area Dealer in charge. , Jianghai Media, local representatives of more than 60 users participated in the event.
FAW XiChai Conway Engine Promotion
FAW Xichai is a leader in the diesel engine industry. It is also an advocate of national brands and a developer of high-end power. The Conway brand is one of the three major product brands of FAW Xichai. The Conway IV product is a typical representative of FAW Xichai's response policy and upgrade. Its Conway 4DW and 4DX products rely on and transplant high-power product development technologies. The system of production methods, quality control, etc. is recognized by users and trusted by OEMs in terms of dynamics, reliability, and economy.
FAW XiChai Conway Engine
The Conway 4DW four- engine adopts the latest version of the German BOSCH CB18 system (24V) B10 with a lifespan of 300,000 kilometers, while other brands use the CB08 system (12V) B10 with a life span of 150,000 kilometers, making the engine more fully burned. , Low vibration, low noise, strong power and more fuel-efficient at the same time. The reliability of the engine is higher. The use of special aluminum alloy pistons and wet cylinder liners greatly reduces the user's maintenance costs.
At the event, FAW Xichai actively interacted with users, and onsite responded to Xichai Kangwei’s knowledge about product and service interactions with users, and pushed the conference atmosphere to a climax. At the end, it had a delivery ceremony with customers who purchased Kama Motors on the spot.
FAW Xichai service concept
Wu Mingjun, director of FAW Wuxi Diesel Sales Co., Ltd., attended the meeting and stated that Xichai will continue to extend the “excellent, lean, and sincere†core services to customers' interests and comprehensively improve customer satisfaction, and use Xichai’s services as a product. Available to users.
HWS Anti-corrosion Pipeline Heat Shrink Sleeve
Product Introduction:
HWS Anti-corrosion Pipeline Heat Shrink Sleeve is also known as heat shrink weld belt/Heat shrinkable weld sleeve (belt), made by irradiation cross-linked polyolefin base material and special sealing hot melt adhesive. WHR Three Layers Heat Shrink Sleeve For Anti-corrosion it has high mechanical strength, stable performance, aging resistance, anti chemical corrosion, sealing, strong adhesive strength, easy to operate, etc.
Product Application:
a) Pipeline Engineering Tubing Apply to petroleum, nature gas, chemical engineering, fuel gas and others project pipeline network for anti-corrosion of steel pipeline repaired and welded junction.And also apply to corrosion resistant coating for repairing the breakage.
b) Apply to 2PE, 3PE, FBE,PP,CTE anti-corrosion coating pipeline for anti-corrosion of welded junction and bend area.
Specification:
When using the heat shrink sleeves, first preheat the pipeline up to 55 degrees Celsius~60 degrees Celsius, and then wrap the joint belt around the treated pipeline with the heat shrink joint belt, make sure that the heat shrink joint belt lap width is more than 50mm, it will shrink at radial direction when the heat effects on it, at the same time the hot melt adhesive start to melt, fill and cover the surface of the pipeline, form continuous and close anti-corrosion system with original pipeline anti-corrosion coating.
Executive Standard: SY/T0413-2002 and SY/T4054-2003 and GB-T23257-2009.
Features & Benefits
a) excellent adhesion ability, adhesion range is wide: can adhere with steel, PE, epoxy coating, etc.
b) strong in corrosion resistance:can effectively block a variety of medium permeability and corrosion, aging resistance, environment stress cracking resistance, resistance to UV irradiation.
c) High mechanical strength: compression resistance, shock resistance, shear resistance.
d) Wide use range: can instruct at -25~35 degrees Celsius temperature range.
e) No volatilization, safety in use, can save energy, can protect environment
f) Long service life.
g) Shrink fast, easy to operate, simple to install.
h) low preheat temperature: when preheat -55~60 degrees Celsius, can install it to shrink.
Other size can customized according to customers' request.
Pipeline Engineering Tubing/sleeves
Pipeline Engineering Tubing,Pipeline Insulation Tape,Heat Shrink Polyethylene,Polyethylene Terephthalate Tubing
KEYUACE Materials Co., Ltd. , https://www.insulationtubing.com