The main functions of the sprinkler are air purification, dust prevention on roads, summer cooling and cooling, etc. There are also some multi-function sprinklers, which also have some special functions such as pesticide spraying, aerial work, fire fighting operations, etc., while they have the function of watering. This is a functional part that is relatively easy to define. It is more difficult to control the amount of sprinkler spraying.
There is no standard data on the amount of water sprayed on the sprinkler. The actual operation depends on a weather condition and road conditions when the sprinkler is sprayed. When the dust is large and the road surface is dry, it is necessary to increase the sprinkling capacity of the sprinkler. After the rain, when the road surface is water or wet, the amount of sprinkling or watering should be reduced. If there is too much dirt or sand on the road surface, it needs to be cleaned by environmental sanitation. After the road car or workers have been cleaned, sprinkle the water.
For users who purchased the sprinkler for the first time, they always like to think that the bigger the sprinkler is, the better the watering is. In fact, this idea is not correct. The greater the sprinkling volume of the sprinkler, the shorter the road surface distance from the sprinkling water will be, resulting in an increase in the number of watering of the sprinkler tanks and an increase in the relative fuel consumption of the round-trip car, which will reduce the economic benefits.
And if the sprinkler is oversprayed, it will easily cause some road area water with poor drainage capacity, which will result in the waste of water resources; in case of too much soil, the road surface will become quite muddy and give pedestrian vehicles. The inconvenience caused by the passage of traffic may even block the situation of the sewers; after the ground is dry, there will be a lot of dust and dust, which greatly increases the work intensity of the sanitation workers.
It can be seen from the above situation that spraying a large quantity of sprinklers may result in wastage, and there is no practical effect on the cleaning and cooling of the road surface. Therefore, the majority of driver friends should use scientific methods to formulate a reasonable The amount of water sprayed can not only achieve the purpose of spraying, but also can reasonably use water resources without causing waste.
Centrifugal Sifter,Turbo Sieve,Flour Airflow Sieve,Flour Sifter Machine
Xinxiang Zhenying Mechanical Equipment Co., Ltd , https://www.beltconveyor.nl