The axis of the main body of the beneficiation ball mill should be horizontal, measured at the top of the large flange of the hollow shaft at both ends, and the height should be consistent. When there is an error, the feeding end is allowed to be 1 mm higher than the discharge end. When the bearing seat gland of the hollow shaft at both ends is seen, the gap between the hollow shaft and the bearing gland should be substantially the same, and the gap between the inner and outer gland should be substantially the same.
The dressing ball mill can be installed in the transmission part after the main machine has been adjusted to a level. First check the quality of the assembly of the transmission part, mainly to check the concentricity of the pinion shaft and the low speed shaft of the reducer. Install and adjust the transmission section based on the ball mill's large gear. The tooth width of the pinion gear is evenly distributed over both sides of the tooth surface of the large gear. From the contact marks of the large and small gears, the contact marks should account for more than 60% of the total length, and the height of the contact marks accounts for about 40% of the full height. If the contact trace is biased towards one end of the flank width, it indicates that the flank is not parallel. If the transmission gear is crushed in a week, the gear clearance is too small, so the pinion should leave the big gear a little. After fixing the position of the ball mill, the center of the ball mill is used to determine the position of the auxiliary beneficiation equipment.
Sms Spunmelt Nonwoven Production Line
The sms non-woven fabric production line is used to produce polypropylene fiber spun webs and hot-rolled reinforced non-woven fabrics. Using polypropylene as the main raw material, supplemented by color masterbatches and additives such as anti-oxidation, anti-pilling, and flame retardant, we can produce polypropylene spunbonded hot-rolled non-woven fabrics with different colors, different properties, and suitable for various purposes. It has different uses and is widely used in medical treatment, sanitation, agriculture, construction, geotechnical industry, making non-woven protective clothing, etc.
Various special treatments are carried out on non-woven fabrics to meet the requirements of customers for various special properties of non-woven fabrics. The treated non-woven fabric has anti-alcohol, anti-blood, and oil-resistant functions, and is mainly used in medical surgical gowns and surgical drapes. Antistatic treatment: Antistatic non-woven fabrics are mainly used as materials for protective equipment that have special environmental requirements for static electricity. Absorbent treatment: Absorbent non-woven fabrics are mainly used in the production of medical consumables, such as surgical drapes, surgical pads, etc. Flame-retardant treatment: Flame-retardant non-woven fabrics are widely used in furniture products and aviation products. Antibacterial deodorization and photocatalyst effect treatment: This kind of non-woven fabric is mainly used in the field of household products. Anti-ultraviolet treatment: Anti-ultraviolet, anti-aging non-woven fabrics are mainly used in agricultural covering fabrics, car covers and other fabrics where sun protection and anti-aging effects are required. Fragrance treatment: Fragrance non-woven fabrics are used in sanitary products (mint, lemon, lavender, etc.).
The composite production line can be replaced with different configurations to produce S, SS, SSS and other series of products to meet the needs of customers in the polypropylene spunbond non-woven market for different purposes.
Sms Spunmelt Nonwoven Production Line,Sms Non-Woven Fabric Making Machine,Sms Spunmelt Composite Non-Woven Fabric Machine,Sms Pp Spunbond Meltblown Making Machine
Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.smmsmachine.com