TSY-HDC80M Manual Horizontal Coring Drill is designed for requirement of the stone mechanized mining, whcih is the mechanized stone mining drilling equirement .
  This machine is used for horizontal drilling operation in large rock stripping and blasting .Horizontal intersection hole drilling operation for wire saw cutting, and it can also do rock detection work .It is the ancillary using equipment for stone mining , large rock blasting and wire saw cutting .
Â
Remark :
  The total weight of machine is 1050kg (Including 15 drill pipes and 3 aiguille ) .
Â
Item No. | TSY-HDC80M |
Bit Diameter | φ76mm |
Minimum Distance between Drilling Center And Ground | 130mm |
Main Motor Power | 15kW |
Rod Specification |  φ73 x 1500mm |
Single Drilling Distance | 1.5 m |
The Min Pressure of Cooling Water | 0.1 Mpa |
Drilling Speed | 2~8m/h |
Working Conditon | -5~+45ºC |
Introduction:
  TSY-HDC80M Manual Horizontal Coring Drill is designed for requirement of the stone mechanized mining, whcih is the mechanized stone mining drilling equirement .
  This machine is used for horizontal drilling operation in large rock stripping and blasting .Horizontal intersection hole drilling operation for wire saw cutting, and it can also do rock detection work .It is the ancillary using equipment for stone mining , large rock blasting and wire saw cutting .
Â
Remark :
  The total weight of machine is 1050kg (Including 15 drill pipes and 3 aiguille ) .
Â
Item No. | TSY-HDC80M |
Bit Diameter | φ76mm |
Minimum Distance between Drilling Center And Ground | 130mm |
Main Motor Power | 15kW |
Rod Specification |  φ73 x 1500mm |
Single Drilling Distance | 1.5 m |
The Min Pressure of Cooling Water | 0.1 Mpa |
Drilling Speed | 2~8m/h |
Working Conditon | -5~+45ºC |
This kind of part is used in Plastic Injection Mould and as one of the components. Our company can finish the whole process from the making of Mould Parts and the complete mold to the producing of Plastic Injection Parts , including the Plastic Injection Molding design.
Injection molding is a process in which custom molded component manufacturers heat a polymer until it reaches a highly plastic state and forces it to flow under high pressure into a mold`s cavity to solidify. Manufacturers then remove the molded part, or molding, from the cavity. The process produces discrete components that are almost always net shape, reducing the need for surface finishing. A mold may contain more than one cavity, allowing Custom Injection Molding companies to produce multiple moldings each cycle. The production cycle time ranges between 10 and 30 seconds. Cycles of 60 seconds or longer are also common.
Plastic Injection Moulds,Plastic Injection Mould Design,Plastic Injection Molding,Plastic Injection Moulding Automotive
KUNSHAN YSL PRECISION MOULD CO.,LTD , https://www.yslprecisonmould.com