MOBIREX EVO2 is a further improvement of the successful EVO universal series, making it more economical and safer to operate.
Reasonable design concept
Optimized material flow and CFS intelligent feed control: The MOBIREX EVO2 range of equipment has a number of technological innovations – especially the unique material flow concept throughout the entire plant – ensuring smooth material flow.
The CFS continuous feed system plays a vital role in achieving higher throughput. According to the crushing host load, the feed frequency of the vibrating feeder and the pre-screening machine can be independently adjusted.
Main advantage
The width of all components in the direction of material flow is gradually expanding
Unlimited material flow
Higher output and lower fuel consumption
Reduced wear and longer life
The special inlet geometry allows the MOBIREX EVO2 series of crushing machines to be ideally fed and ensures a smooth flow of material during construction.
The remote control hydraulic lifts the crusher inlet cover and the upper counterplate to effectively reduce the risk of crusher inlet blockage. The full hydraulic overload protection system effectively protects the equipment from damage caused by unbreakable materials. A reasonable hammer clamping system and an innovative locking and turning safety system make the replacement of the hammer extremely easy and safe.
Locking and turning mechanism - excellent safety system
The “Lock and Rotate†system provides the highest level of safety in replacing the hammer and clearing the blockage. Special locks for the maintenance doors and components ensure that the crushing unit remains in operation in only one area at a time.
If the operator wants to run another hazardous area, he/she must undo the lock from the area that was previously automatically locked and protected. The plug-in locking and turning device allows manual rotation and locking of the crusher rotor at any location externally, safely replacing the hammer and clearing the blockage.
Brief guide
step one
The "lock rotor" command is activated by the touch screen of the control device to safely lock the rotor.
Step two
In this way, the rotor locking and turning device is activated and the pulley gear is rotated by means of the handle.
Step three
Next, insert the operating element into the system launch panel. The rotor is locked safely and the special lock button that opens the danger zone is released.
Step four
Once the lock button is removed, the operating element and the locking device can no longer be unlocked - the rotor remains in a safely locked state.
Step five
The shredder housing is opened after the special lock button is inserted. When the casing is opened, the special lock button cannot be withdrawn and the blocked material is safely removed - the rotor is safely locked.
Step six
The safety system also improves comfort. With the handle on the rotor locking and turning device, the operator can safely turn the rotor without having to be in a hazardous area and, in this way, can be moved to the desired position for replacement.
Efficient screening - low wear and excellent finished product quality
The MOBIREX EVO2 series of equipment is pre-screened by a two-layer, independent vibrating pre-screener to ensure efficient screening of fines. The medium-sized material is directly bypassed into the discharge tank. In this way, not only the wear on the crushing machine but also the quality of the finished product is improved.
An optional final screening machine screens specific particle size materials. The large screen area ensures that even aggregates with a particle size of less than 30 mm can be effectively screened. The higher discharge height ensures a large pile and, in addition, the oversized aggregate return belt breaks the material in a closed loop.
Innovative concept - economical and reliable
The innovative drive concept of “Electric – Diesel – Direct Drive†is a feature of the MOBIREX EVO2 series of equipment. The crusher is driven directly by the fluid coupling, which is extremely efficient and powerful, and is also very satisfactory with low energy consumption.
The fluid coupling not only ensures high operational reliability, but also protects the equipment. The onboard generator is used to drive the pre-screener, vibratory feeder and belt conveyor. Convenient, fully automatic speed setting - adapts to different materials and requires no special setup time.
(This article is from Ke Lei)
EJ Industrial Group Co.,Ltd is a leading professional valves manufacturer in China.
Our industry valves products range cast steel and Forging Steel Floating Ball Valve, Trunnion Mounted Ball Valve, Dbb Ball Valve , Gate Valve , globe valve, Check Valve and high performance Butterfly Valves. The fields we serve include oil and gas, LNG, refinery, chemical, pharmacy, mining industry, and so on.
All our products are manufactured and tested according to international standards API 6D, API6A, API600, ANSI B16.34, API607, API6Fa, API 591, API594,API609, API602, BS5153, BS1868, BS1873, DIN3202, DIN3352, BS5163, BS5153,BS5150, AWWA C509, API598, and EN12266.
Dual Plate Check Valve,Dual Wafer Check Valve,Double Door Check Valve,Check Valve
EJ INDUSTRY GROUP , https://www.ej-industry.com