Characteristics
| ·Type: | ·Media: | ·Application: |
| centrifugal | Multi-fluid | suction |
| ·Other characteristics: | ·Flow rate: | ·Head |
| Double-aspiration | Min.:0m3/h | Min: 0m |
| Single-stage | Max.: 11600m3/h | Max: 200m |
Description
The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.
Features
Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability.
High efficiency hard alloy, and low NPSH
To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.
The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements
Â
| Item | Split case/double suction water pumps |
| Model | MS |
| Material | Cast iron, SS 304,SS 316L, etc |
| Color | Decided by user |
| Mode | Horizontal |
| Impeller | Double suction impeller |
| Drive | Belt or coupling |
| Seal | Packing seal or mechanical seal |
| Speed | 2950r/m, 1450r/min, 970r/min,730r/min,585r/min |
| Theory | Centrifugal pump |
| Structure | Single stage pup |
| Usage | Clean water, raw water, sea water etc. |
| Power | Electric motor or Diesel engine |
| Standard | ISO |
| Application | Plant, mine, power station, urban water supply, irrigation etc |
| Outlet diameter | 1 inch to 32 inch |
| Capacity | 25-15000m3/h |
| Head | 8.6-200m |
| Power | 22-1250kw |
| Warranty | 1year |
| Certificate | ISO9001 |
| OEM | Acceptable |
| Feature | High flow rate, high efficiency, easy maintenance |
Application
Fire Protection
Water Transfer
Municipal Water Supply
Irrigation
Industry
Process Water
Raw Water Supply
Dewatering (Clean Water)
Flood Mitigation
Details
Bearing Assembly
Bearing: SKF TIMKEN FAG
Shaft: SS 410
Wet End
A05 Polyurethane
A07 Rubber
A49
Fastener
Galvanized
Stainless Steel
Sealing
Mechanical Seal
PTFE Packing
Hi-Seal
FAQ
A: What kind of company you are?
Q: We are centrifugal pump manufacture located in Boy Town, Baoding, China, with more than 20years experiences. We were gaining good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business based on the quality control, price, packing, delivery time etc.
A: What's the quality assurance you provided and how do you control quality?
Q: Established a procedure to check products at all stages of the manufacturing process: Casting, Heat treatment, Machining, Assembly, and Testing.
Q: Can you install the motor or diesel engine with the pump for us?
A: yes, we can, it's no problem, and we are experienced in this.
Q: What's your MOQ?
A: Trial sample order is OK.
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A......
Q: What certificates do you have?
A: CE, ISO 2008, UL.....
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
Q: What is the delivery time?
A: 15-30 days according to customer quantities.
Q: Can you do OEM brand?
A: Yes, Welcome.
Q: What information should I offer to get pump solution?
1, Material:
2, Head:Â Â Â Â m
3, Flow:Â Â Â m3/h
4, Medium size:Â Â Â mm
5, Particle shape (smooth or sharp):
6, Medium pH level:
7, Temperature:
8, Drive type:
9. Power supply:
Contact me for detail offer with curve and drawing
Vicky
Mob: +86 158 3123 7232
Tel: +86 312 8929296
Fax: +86 312 3085383 Diesel Engine Driven Double Suction Centrifugal Pump
Characteristics
| ·Type: | ·Media: | ·Application: |
| centrifugal | Multi-fluid | suction |
| ·Other characteristics: | ·Flow rate: | ·Head |
| Double-aspiration | Min.:0m3/h | Min: 0m |
| Single-stage | Max.: 11600m3/h | Max: 200m |
Description
The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.
Features
Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability.
High efficiency hard alloy, and low NPSH
To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.
The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements
Â
| Item | Split case/double suction water pumps |
| Model | MS |
| Material | Cast iron, SS 304,SS 316L, etc |
| Color | Decided by user |
| Mode | Horizontal |
| Impeller | Double suction impeller |
| Drive | Belt or coupling |
| Seal | Packing seal or mechanical seal |
| Speed | 2950r/m, 1450r/min, 970r/min,730r/min,585r/min |
| Theory | Centrifugal pump |
| Structure | Single stage pup |
| Usage | Clean water, raw water, sea water etc. |
| Power | Electric motor or Diesel engine |
| Standard | ISO |
| Application | Plant, mine, power station, urban water supply, irrigation etc |
| Outlet diameter | 1 inch to 32 inch |
| Capacity | 25-15000m3/h |
| Head | 8.6-200m |
| Power | 22-1250kw |
| Warranty | 1year |
| Certificate | ISO9001 |
| OEM | Acceptable |
| Feature | High flow rate, high efficiency, easy maintenance |
Application
Fire Protection
Water Transfer
Municipal Water Supply
Irrigation
Industry
Process Water
Raw Water Supply
Dewatering (Clean Water)
Flood Mitigation
Details
Bearing Assembly
Bearing: SKF TIMKEN FAG
Shaft: SS 410
Wet End
A05 Polyurethane
A07 Rubber
A49
Fastener
Galvanized
Stainless Steel
Sealing
Mechanical Seal
PTFE Packing
Hi-Seal
FAQ
A: What kind of company you are?
Q: We are centrifugal pump manufacture located in Boy Town, Baoding, China, with more than 20years experiences. We were gaining good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business based on the quality control, price, packing, delivery time etc.
A: What's the quality assurance you provided and how do you control quality?
Q: Established a procedure to check products at all stages of the manufacturing process: Casting, Heat treatment, Machining, Assembly, and Testing.
Q: Can you install the motor or diesel engine with the pump for us?
A: yes, we can, it's no problem, and we are experienced in this.
Q: What's your MOQ?
A: Trial sample order is OK.
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A......
Q: What certificates do you have?
A: CE, ISO 2008, UL.....
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
Q: What is the delivery time?
A: 15-30 days according to customer quantities.
Q: Can you do OEM brand?
A: Yes, Welcome.
Q: What information should I offer to get pump solution?
1, Material:
2, Head:Â Â Â Â m
3, Flow:Â Â Â m3/h
4, Medium size:Â Â Â mm
5, Particle shape (smooth or sharp):
6, Medium pH level:
7, Temperature:
8, Drive type:
9. Power supply:
Contact me for detail offer with curve and drawing
Vicky
Mob: +86 158 3123 7232
Tel: +86 312 8929296
Fax: +86 312 3085383
Automatic Type Oil Distillation Plant
The Waste Engine Oil Distillation Plant is used to refine waste engine oil, crude oil and fuel oil after pyrolysis process into diesel grade oil, gasoline or and base oil. The daily capacity of this plant is about 5-6 tons.
Flow-chat of waste engine oi Distillation Plant
Advantage of waste engine oi distillation plant
1. Unique and original manufacturing and technology with our own formula of our equipments in China;
2. Unique horizontal design, high oil output with about 90% oil yield and 100% conversion rate, highly effective and profitable;
3. Good quality end product oil as the substitution of standard diesel oil in usage;
Automatic submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices;
4. Sync gas recycling system: fully burned after recycling and utilization, saving fuel and preventing pollution;
5. National patent, unique heat insulation shell: high efficiency temperature keeping, excellent energy-saving effect;
6. High condensing efficiency condensers with more oil output. Good quality oil, longer lifetime, and easy to clean;
7. National patent water film smoke scrubbers: efficient removal of the acid gas and dust of the smoke, environmental friendly to meet related national standards.
Technical Parameter of Waste engine Oil Distillation Plant
|
NO. |
Item |
Technical Parameter |
|
1 |
Suitable Raw Materials |
Waste engine oil, Pyrolysis fuel oil, crude oil |
|
2 |
Structure |
Horizontal Type |
|
3 |
Capacity(24 hours) |
3.5-6.5Mt |
|
4 |
Work Pressure |
Normal Pressure |
|
5 |
Oil Yield |
80%-90% |
|
6 |
Power |
18 kw/H |
|
7 |
Cooling Method |
Cycle water |
|
8 |
Condensers |
4 pieces of Vertical condensers |
|
9 |
Emission Treatment |
New DE-sulfurization Smoke Scrubbers |
|
10 |
Heating Method |
Hot Air |
|
11 |
Type of Installation |
With Foundation |
|
12 |
Noise dB(A) |
≤85 |
|
13 |
Dimension of Reactor(mm) |
Ф2200×6000 Ф2500×8800 |
|
14 |
Operating Mode |
Semi-continuous Operation |
|
15 |
Main Chamber Weight (MT) |
10~13Mt |
|
16 |
Total Weight(MT) |
25~35Mt |
|
17 |
Installation Space Required |
35m*15m |
|
18 |
End Product |
Non-standard diesel oil |
|
19 |
Manpower |
1~2/shift |
|
20 |
Shipment Requirement |
2*40HC=Ф2200×6000 1*40HC+1*40FR=Ф2500×8800 |
Automatic Type Oil Distillation Plant
Automatic Type Oil Distillation Plant,Automatic Type Waste Oil Distillation Plant,Used Engine Oil Refining Machine,Automatic Waste Oil Distillation Plant
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com