Dcd3600A Stud Welder and Stud Welding Machine

Model NO.: DCD3600A
Welding Speed: 5-30PCS / Min
Frequency: 50-60Hz
Single Maximum Powe: 90kVA
Stud Welding Range: M6-M36
Rated Current: 180A
Degree of Protection: IP22
Trademark: Mengzhijie
Origin: Zhangjiagang, Jiangsu
HS Code: 85153900
Technical advantages of DCD3600A Stud Welder and Stud Welding Machine

1, Multi stud welding, stud welding using two sets and machines, ext principle, Both to achieve small stream welding, but also to achieve high current welding, a wide welding range, and covering almost all the sizes on the market stud welding, welding efficiency is extremely clear.

2, When extension, if the construction of a stud welder fails, another stud welding machine can still be used for the production won valuable time. In the maintenance, the circuits boards are interchangeable in a timely manner to determine the point of failure, easy to repair, do not affect the production. And machine, welding power increased by 1 fold, can weld a variety of large-sized pin.

3, As a versatile stud welder with four ground cable., Evenly distributed on the work piece during welding, can effectively eliminate magnetic blow, so that the weld studs fuller mellow.

4, It is equivalent to the purchase of a high-power stud welder when multifunctional welder and machine, extension is equivalent to the purchase of two small power stud welder.

5, The cost will be low and weight be light when two small stud welder shared a chassis. Price is relatively cheap to purchase the original price of two small stud welding power 75% of full preferential price of 25%.

6, DCD series of stud welding products are mature, After many years of actual use, the failure rate is very low and life of up to one million times, With the use of high-tech products AJLH-III-type stud welding gun, A welding gun through the combination, can be welded 5 mm -36 mm kinds of studs, welding pass rate, easy to use.

120D/2 polyester Embroidery Machine Bobbin thread
1.High color fastness
2.Low shrinkage
3.Good gloss
120D/2 polyester embroidery machine bobbin thread
1.High color fastness
2.Low shrinkage
3.Good gloss
4.Soft like silk
5.High chemial resistance
6.Well embroidery
7.High efficiency
Spec:120D/2(108D/2)

Embroidery Bobbins

Embroidery Bobbins, Prewound Embroidery Bobbins,Embroidery Floss Bobbins,Embroidery Thread Bobbins,Embroidery Machine Bobbin

Qian Suo Embroidery Parts Co.,Ltd , http://www.china-embroidery-parts.com