Â
In Steam Retort, steam are directly injected into the retort. Since the steam is freely allowed to pass through the entire chamber, all the products get temperature, cooking effect and sterilization effect uniformly.
Application:
The steam retort is suitable for all kinds of  high temperature resistant packaging material.
 Technical Parameter:
Structural Chart:
Working Principle:
Feature:
Contact Us:
Actually, a wiper assembly that refuses to move might have a simple blown fuse. But usually fuses don't blow on their own. Even at full stall, the current draw of the motor should be well below the fuse's rating. If the fuse is blown, odds are there's something else wrong, like a shorted wiper-motor armature or faulty wiring anywhere along the harness between the motor and the switch. Even a mechanical problem like a seized bushing can make a fuse eventually fail.
The fuse is okay, or you've replaced it with one that has the appropriate amp rating. There's still no action? With the wipers and ignition on, whack the motor assembly with the handle of a screwdriver or a rubber mallet. If that gets things moving, you've got a bad commutator or an open winding on the armature. When the motor parks, if the brushes are sitting on the bad segment, no current flows. Whacking the whole business smartly can sometimes jolt things into motion. Because there are often a dozen windings on the armature, the motor runs fine until the next time it comes to rest on the bad spot.
Pin Shaft Wiper Arm,Rear Windshield Wiper Arm,Window Wiper Arm,Marine Wiper Arm
COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD , https://www.capwiper.com