33 Zones Door Frame Archway Walk Through Metal Detector

33 Zones Door Frame Archway Walk Through Metal Detector


Features
 
1- Easy Assembly
JH-33Z, 33ZONE Modular design allows for a quick and easy assembly, only 4 screws to mount it.
 
2- Pinpoint detection zones
there are 33 distinct pinpoint detection zones for full target coverage on the left, centre and right side of the body from head to toe traffic lights on the entrance of the archway ,there traffic light to remind you the detector is ready for passenger.
 
3- Audible and visual alarms
there is audible alarm and visual LED lights signal when a target has been detected ,the pinpoint lights on the exit gatepost will show the location of any offending object.
 
4- Touchpad controls
The accesss control panel is designed for use by authorized personnel with specific,multi-level security codes.it allows authorized users to change settings.
 
5- Self-test
no battery is required for memory retention.while the unit is in operation,a self-test is performed , any failures or problems will be immediately reported on the LCD display
 
6- Networking ability(option accessory)
The functions of networking, remote control, monitoring, data analysis and group management all are available(see below images).


 
 
Specifications:
 1) Operating Temperatures
 -20°C to + 70°C; Humidity: To 95% non-condensing
2) Power Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring, switching or adjustments required.
3) Weatherproof
Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures," IEC 529.
4) Tamper-Proof
All settings are secured with a key lock and two levels of access codes. Further security is accomplished with a cabinet lock which prevents unauthorized access to physical cables, connectors and electronics.
5) Control Outputs
  Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
6) Traffic Counter
   Counter tracks the number of patrons that have passed through the detector, the number of alarms and calculates alarm percentage.
7) Synchronization
     Dual channels and DSP circuitry allow several JH-33Z's to operate simultaneously in close proximity to one another.
8) Interference Suppression
     DSP built-in circuitry eliminates effects from x-ray monitors and other potential electrical interference sources.
9) Programmes
    Eighteen (18) independent programs designed to meet all installation-specific requirements including the new TSA Enhanced Metal Detector (EMD) System requirements for airports.
10) Alarms
       Audible tone and volume adjustable. Bright LED visual alarm
11) Target Pinpointing Lights
   Thirty-three distinct zones are displayed with two independent columns of LED's located on exit side of the gate.
 
Dimensions
(1)Overall sizes (mm): 2240 (height) x 900 (width) x 580(depth)
(2) Size of alley (mm): 2240 (height) x 760 (width) x 580 (depth)
 
 






 
SaveSave 33 Zones Door Frame Archway Walk Through Metal Detector


Features
 
1- Easy Assembly
JH-33Z, 33ZONE Modular design allows for a quick and easy assembly, only 4 screws to mount it.
 
2- Pinpoint detection zones
there are 33 distinct pinpoint detection zones for full target coverage on the left, centre and right side of the body from head to toe traffic lights on the entrance of the archway ,there traffic light to remind you the detector is ready for passenger.
 
3- Audible and visual alarms
there is audible alarm and visual LED lights signal when a target has been detected ,the pinpoint lights on the exit gatepost will show the location of any offending object.
 
4- Touchpad controls
The accesss control panel is designed for use by authorized personnel with specific,multi-level security codes.it allows authorized users to change settings.
 
5- Self-test
no battery is required for memory retention.while the unit is in operation,a self-test is performed , any failures or problems will be immediately reported on the LCD display
 
6- Networking ability(option accessory)
The functions of networking, remote control, monitoring, data analysis and group management all are available(see below images).


 
 
Specifications:
 1) Operating Temperatures
 -20°C to + 70°C; Humidity: To 95% non-condensing
2) Power Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring, switching or adjustments required.
3) Weatherproof
Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures," IEC 529.
4) Tamper-Proof
All settings are secured with a key lock and two levels of access codes. Further security is accomplished with a cabinet lock which prevents unauthorized access to physical cables, connectors and electronics.
5) Control Outputs
  Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
6) Traffic Counter
   Counter tracks the number of patrons that have passed through the detector, the number of alarms and calculates alarm percentage.
7) Synchronization
     Dual channels and DSP circuitry allow several JH-33Z's to operate simultaneously in close proximity to one another.
8) Interference Suppression
     DSP built-in circuitry eliminates effects from x-ray monitors and other potential electrical interference sources.
9) Programmes
    Eighteen (18) independent programs designed to meet all installation-specific requirements including the new TSA Enhanced Metal Detector (EMD) System requirements for airports.
10) Alarms
       Audible tone and volume adjustable. Bright LED visual alarm
11) Target Pinpointing Lights
   Thirty-three distinct zones are displayed with two independent columns of LED's located on exit side of the gate.
 
Dimensions
(1)Overall sizes (mm): 2240 (height) x 900 (width) x 580(depth)
(2) Size of alley (mm): 2240 (height) x 760 (width) x 580 (depth)
 
 






 
SaveSave

The Double Girder Gantry Crane is commonly employed to handle large wokring pieces outdoors, which has strong hoisting capacity, large span, good stability, etc. Double girder Gantry Crane self-weight is larger than that of Single Girder Gantry Crane even for the same hoisting capacity weight, and the cost is also higher. According to the main girder structure, double girder gantry crane can be divided into 2 types: box girder and truss girder. Generally the box-type girder is the most commonly seen type.

Weihua also provide European standard (FEM and DIN standard) double girder gantry crane with the following features:

1. Adopt modularization design for lifting mechanism, FEM/DIN standard, light weight

2. High-strength alloy-steel forging wheels

3. No welded legs for profile steel

4. Capsule cab with broad vision

5. Rectangular steel- pipe handrail

6. Hard tooth surface reducer imported from Germany

7. Power supplied by engineering drag chain

8. World's leading anti-sway control technology

10. Advanced fabricated technology

11. Low-energy and maintenance-free

Capacity: 10t - 100t or custom

Span: 6m - 35m or custom

Lift height: 6m - 12m or custom

Work duty: A5, A6 or custom

Sling device: hook or other

Packing: Wooden case, rain cloth, reinforced bar, etc.

Weihua is a China leading crane manufacturer with 31 years experience. You can find our products all over China, also in 110 countries such as the UK, Russia, USA, Thailand, Ukraine, Egypt, Mexico, Pakistan, Malaysia, etc. We have confidence to provide you with the right products and professional solutions. Welcome to visit Weihua.

Double Girder Gantry Crane

Rtg Crane,Double Girder Gantry Crane,Gantry Crane With Grab,Grab Bucket Gantry Crane

Henan Weihua Heavy Machinery Co., Ltd. , https://www.weihuacranefactory.com