With 10 HP HR186FA air-cooled diesel engine, Ensure a big flow and self-priming type;Â water pump
♦ Also have 2inch, 3 inch and 4 inch models, just according what you need!
♦ Recoil and Electric start are optional ensure easy start!   water pump
   Â
WATER PUMP | Model | DP40 | |
Suction,discharge port diameter[mm(in)] | 100(4') | ||
Cont.head(m) | 31 | ||
Self-priming time(s/4m)Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 180 | ||
Max suction head(m) | 8 | ||
Cont.capacity(m³/hr) | 96 | ||
ENGINE | Engine model | HR186F | |
Speed(rpm) | 3600 | ||
Fuel consumption(g/kw.h) | 285 | ||
Type | Single-cylinder,vertical,4-stroke air-cooled diesel engine | ||
Displacement(cc) |
 406 | ||
Bore*stroke(mm) |
 86*70 | ||
Starting system |
Recoil or Electric | ||
Fuel tank capacity(L) | 5.5 | ||
STANDARD FEATURES | Oil alert | yes | |
Connector of infall,Connecto of outfall | yes | ||
Filter | yes | ||
Seal ring | yes | ||
Hoop | yes | ||
DIMENSIONS | Dimension(L× W× H)(mm) | 645×475×605 | |
Net weight(kg) | 69 | ||
20FT | 99 |
Â
Step 1: preparation before working
- Put machine above ground, inject diesel or oil.
- Add 0# (or above) diesel.
- Open the black lid and inject 2-5 liters, run-dry is prohibited
Step 2: adjust switch
- adjust the switch to the center(or below) and tighten(or adjust to the maximum).
Step 3: discharge air in tube
- Air existing in tube due to the first time use, need to discharge air in tube.
 Step 4: Pressure reducing valve
- Press the pressure valve down by hand (musthold the pull plate).
- Pull down plate four times gently and wait for the oil out. Then tighten the connector again.
Step 5: Pull the plate
- (do not use the fingers press the valve) Pull the plate one time gently (the valve will pop up automatically) and put the wire back.
- Re-press the valve and hold the machine bracket, holding the pull-line with both hands and pulling it.
Step 6: close the machine
- Adjust the switch to minimum for closing the machine.
Â
♦ We are professional manufacture of air-cooled diesel engine(3-20HP),diesel water pump(1.5-6Inch), small construction machines and so on.
♦ Morden and beautiful factory of Chongqing, warmly welcome YOU from all over the world have a visit to us!
♦  ISO, CE, GS, ROHS certification for all over the world customer.
Factory:Â 2,3,4 inch model agriculture equipment agricultural irrigation diesel water pump
With 10 HP HR186FA air-cooled diesel engine, Ensure a big flow and self-priming type;Â water pump
♦ Also have 2inch, 3 inch and 4 inch models, just according what you need!
♦ Recoil and Electric start are optional ensure easy start!   water pump
   Â
WATER PUMP | Model | DP40 | |
Suction,discharge port diameter[mm(in)] | 100(4') | ||
Cont.head(m) | 31 | ||
Self-priming time(s/4m)Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 180 | ||
Max suction head(m) | 8 | ||
Cont.capacity(m³/hr) | 96 | ||
ENGINE | Engine model | HR186F | |
Speed(rpm) | 3600 | ||
Fuel consumption(g/kw.h) | 285 | ||
Type | Single-cylinder,vertical,4-stroke air-cooled diesel engine | ||
Displacement(cc) |
 406 | ||
Bore*stroke(mm) |
 86*70 | ||
Starting system |
Recoil or Electric | ||
Fuel tank capacity(L) | 5.5 | ||
STANDARD FEATURES | Oil alert | yes | |
Connector of infall,Connecto of outfall | yes | ||
Filter | yes | ||
Seal ring | yes | ||
Hoop | yes | ||
DIMENSIONS | Dimension(L× W× H)(mm) | 645×475×605 | |
Net weight(kg) | 69 | ||
20FT | 99 |
Â
Step 1: preparation before working
- Put machine above ground, inject diesel or oil.
- Add 0# (or above) diesel.
- Open the black lid and inject 2-5 liters, run-dry is prohibited
Step 2: adjust switch
- adjust the switch to the center(or below) and tighten(or adjust to the maximum).
Step 3: discharge air in tube
- Air existing in tube due to the first time use, need to discharge air in tube.
 Step 4: Pressure reducing valve
- Press the pressure valve down by hand (musthold the pull plate).
- Pull down plate four times gently and wait for the oil out. Then tighten the connector again.
Step 5: Pull the plate
- (do not use the fingers press the valve) Pull the plate one time gently (the valve will pop up automatically) and put the wire back.
- Re-press the valve and hold the machine bracket, holding the pull-line with both hands and pulling it.
Step 6: close the machine
- Adjust the switch to minimum for closing the machine.
Â
♦ We are professional manufacture of air-cooled diesel engine(3-20HP),diesel water pump(1.5-6Inch), small construction machines and so on.
♦ Morden and beautiful factory of Chongqing, warmly welcome YOU from all over the world have a visit to us!
♦  ISO, CE, GS, ROHS certification for all over the world customer.
Factory:Â
Replacement Parts For Sunflower/ Sunflower Parts
Our Replacement Parts for Sunflower is good in quality and competitive in price. We are manufacturer and supplier of Replacement Parts for Sunflower following your specific requirement. We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional Replacement Parts for Sunflower with good services for you!Welcome to people from all over the world to buy Sunflower Replacement Parts, Sunflower Disc Parts from us.
Replacement Parts for Sunflower
Replacement Parts For Sunflower,Sunflower Replacement Parts,Sunflower Disc Parts,Sunflower Parts
Ningbo Borine Machinery Co.,Ltd. , http://www.borine-agroparts.com