1400W Portable Hand Held Concrete Vibrator

1400w portable hand held concrete vibrator

Portable concrete vibrator 1400W.
Ideal for construction, patching and other repair jobs, this concrete vibrator allows you to remove air bubbles and level concrete.
The lightweight and compact design allow for all day use. 
The vibrator features a handy lock-on button for extended use.



  1400w portable hand held concrete vibrator

Portable concrete vibrator 1400W.
Ideal for construction, patching and other repair jobs, this concrete vibrator allows you to remove air bubbles and level concrete.
The lightweight and compact design allow for all day use. 
The vibrator features a handy lock-on button for extended use.



 

Excavator Cylinder: The hydraulic cylinder is a linear actuator whose output force is proportional to the effective area of the piston and the pressure difference between both sides. ‍Its function is to convert hydraulic energy into mechanical energy. The input of the hydraulic cylinder is the flow and pressure of the fluid, and the output is the linear motion speed and force. The piston of the hydraulic cylinder can complete linear reciprocating motion, and the output linear displacement is limited. The hydraulic cylinder is an energy conversion device that converts hydraulic energy into mechanical energy for reciprocating linear motion. The hydraulic cylinder is basically composed of a cylinder tube and a cylinder head, a piston and a piston rod, a sealing device, a buffer device and an exhaust device.

Cylinder maintenance method:

One. The hydraulic oil should be replaced regularly during the use of the cylinder, and the system filter should be cleaned to ensure cleanliness and prolong its service life.
two. Each time the oil cylinder is used, it needs to be fully extended and retracted for 5 strokes and then run with load. Doing so can exhaust the air in the system and preheat the systems, which can effectively avoid the presence of air or water in the system and cause gas explosion (or scorch) in the cylinder body, which will damage the seals and cause leakage in the cylinder. Wait for failure.
three. Control the system temperature. Excessive oil temperature will reduce the service life of the seal. Long-term high oil temperature will cause permanent deformation of the seal or even complete failure.
four. Protect the outer surface of the piston rod to prevent bumps and scratches from damaging the seals. Frequently clean up the mud and sand on the dust ring of the cylinder dynamic seal and the exposed piston rod to prevent difficult-to-clean dirt sticking to the surface of the piston rod Into the inside of the cylinder, damage the piston, cylinder or seal.
Fives. Check the connections of the threads and bolts frequently, and tighten them immediately if they are loose.
six. Frequently lubricate the connecting parts to prevent corrosion or abnormal wear in the absence of oil.



SEM 50F, 650 Welding Cylinder
Liugong loaders ZL50CN, 855N, 856 Welding Cylinder,
SDLG 956L 952H 953 Carbon Fiber Steering Cylinder,
XCMG Steering Cylinder LW500KL ZL50GN,
Komatsu WA380, WA380-3, WA380-5, WA430-5 Steering Cylinder
DEGONG loader Hydraulic System
Foton Lovol Loader Hydraulic Cylinder
Lonking 855N loader Hydraulic Cylinder
XGMA 932 936 956 Loader Hydraulic Cylinder
Changlin Loader Hydraulic Cylinder
Shantui SL50W Custom hydraulic system
And we have more.

Cylinder

Welding Cylinder,Cylinder Of Sdlg Loader,Xcmg Loader Steering Cylinder,Wheel Loader Hydraulic Cylinder

Shandong Tianfu International Trade Co.,Ltd. , https://www.tfloaderparts.com